Home
Search results “Plans for baseball helmet storage”
Cubby storage Easy build.
 
07:20
Simple to build cubby storage. Build a cubby storage to use for just about anything. doesn't take long to put together once you get the few pieces cut out. Can also be adjusted to any size bed you chose. You can also do it with just some hand tools or a jig saw. Free Plans Here: http://rabbitwood.net/cubby-storage-easy-build/ Facebook: https://www.facebook.com/rabbitwoodworkshop Instagram: https://www.instagram.com/rabbitwoodworkshop Etsy: https://www.etsy.com/shop/RabbitWoodWorkshop Website: http://www.rabbitwood.net
Views: 379251 Rabbitwood Workshop
How to create your own helmet storage // helmet wall mount // helmet rack
 
15:49
How to create your own helmet storage // helmet wall mount // helmet rack So, I was looking for a convenient way to store my helmets. I wanted to keep them in sight in the hall, but on one condition: the system needed to be cool. And I found one! In this video I’ll show you how to make a your own cool storage for your helmet (s) (helmetrack, helmet storage). For the sake of completeness, I mention that I found this design on the internet, only unfortunately I cannot find the picture anymore. So the honors of the design are for someone else ;-). Anyway, with this design you can go many directions. For the discs you can use wood, plastic, etc. and you can also play with the shapes. Instead of steel you could also choose copper, aluminum, reinforcing steel or wire, etc. Down below I’ll mention the necessary materials and tools as well as some info on the dimensions I’ve used. I use a piece of steel 59cm long. The kinks that I make, are sequentially at 18.5, 19, 18.5 and 2 cm. The width of the sample is 2 cm and the thickness of 0,4cm. The diameter of the (oak) wooden discs are 15 and 9cm. The thickness of the discs are 2cm. Note for all dimensions: share by 2.54 and you have the inches. I wish you lots of fun making this helmet rack (helmetrack, helmet storage) and if you have any suggestions for improvement let me know in the comments. To share your own design, please also share in the comments section of the video. Work order You can either start with the two wooden discs or the steel arm. I started with the wooden discs. Take a piece of wood and determine the diameters of both disks. You can play with it. It just depends on the result you want to achieve. Mark the circles and cut them out with a jigsaw. Use a sander for smooth sanding and for breaking the edges. If necessary, use varnish for extra effect. Next, bend the steel into the desired shape with the nylon hammer. Use, if necessary a file and wire brush to smoothen it up. I chose sharper angles, but you can also work with curves for example. Drill three holes (one for the small wooden disc and two for the wall mount) with a drilling machine and immerse them so that the screws fall nicely in the steel arm. Afterwards deburr them. The diameter of the holes depends on the screws that you want to use. You can choose to paint on the steel to create your own personal touch. Then you need a chisel and hammer to get rid of some wood (big wooden disc) so the steel bracket fits nicely into the disc. Drill two holes in the surface (e.g. wall) where you want to attach the helmet rack. The diameter depends on the screws / wall plugs you’re using. Attach the small wooden disk to the bracket with one screw. Then screw the steel bracket on the wall. Clean the surface of the large wooden disc and use double-sided tape to attach it blindly to the surface. Done. Congratulations: You now have your own helmet storage // helmet wall mount // helmet rack !! Material used (for one helmet rack): (Galvanized) steel (59cm) Oak plank Black paint Blanke lak Plugs (4mm) Screws Tools used: Hacksaw Iron file Nylon hammer Drilling machine Sander Jig saw Chisel Brush Leave a LIKE if you enjoyed the video. Consider SUBSCRIBING, it helps a lot :) https://www.youtube.com/channel/UC4ys2wjarQFm0OWCjkb_qWQ Bikes: - Honda CBR 954 rr Fireblade (2002) Options: https://youtu.be/ANgvEZ2QRRU - Honda CB550 Four K3 (1978) Not yet in use for motovlogging while I'm restoring this bike. Vlogging equipment: - GoPro Hero 4 Black (helmet mount, fairings, seat, tank, mirrir) - GoPro Hero 1 (mirror, seat, tank) - mic: cheapest shit available but works fine
Views: 9641 Dutchie Does
Perfect Motorcycle Helmet Rack (Easy Make it yourself)
 
02:44
Easy make it yourself motorcycle helmet Holder Hanger. 50$ (TOTAL) at Lowe's. Orginal parts are for Home Improvement and BackYard, but works perfectly for
Views: 22788 SeregaXAPbKOB
How to Build a Baseball Bat Rack
 
04:01
This is a short video on how to build a basic bat rack! I hope you enjoy! Check out all of the links for more Woodworking Nut! Template: https://drive.google.com/file/d/0BzvA9lxGzfc9WFlDNFctQ0NhZlU/view?usp=sharing Website: http://www.woodworkingnut.com/ Keek: https://www.keek.com/EricLindberg Twitter: https://twitter.com/Woodworking_Nut
Views: 14105 Eric Lindberg
Baseball Dugout Organizer from The Bench Coach
 
01:06
Baseball and softball teams need a way to organize all the bats, helmets, special catcher's gear and more inside the dugout. The Bench Coach organization system is the answer! Get yours at: http://www.theBenchCoach.com/
Views: 2565 Adam McTomic
Build Your Own Custom Headache Rack/Window Cage (For Pick-up Truck)
 
10:04
I've wanted to do this since before I could even drive. This week I built a headache rack for my Ford Ranger, solid as a rock and actually pretty simple to make. Made of square tubing, expanded steel, washers, and rivets. Song: Every Cloud - Rameses B
Views: 236370 ZNA Productions
Building A Simple Tarp Tent + Perfect Steak, Shrooms, and Tatos
 
11:53
I'm just camping. Thought you guys might like to watch. Sorry for the 1080p, I'm using my little vlogging camera, I didn't wanna bring my GH4 into the woods, hopefully it's watchable.
Views: 216023 ZNA Productions
How To Make: The Saw Blade Slinger (The Disaster Bat)
 
09:59
The instructional video on the building of the one-handed version of the saw blade slinger from Homemade Weapons Part 4. Only this one's called The Disaster Bat.
Views: 319413 ZNA Productions
How to Make *YOU KNOW WHO'S* Fur Cloak / Cape from GAME OF THRONES
 
09:19
Grab a cheeky hoodie: https://www.teespring.com/alpha-zed Today we're making a certain someone's cape from of thrones with a bed sheet and an Ikea rug. Pretty snazzy, great for Halloween. Music: The Professional - Beat Gates Miracle - Rameses B Deeper - Rameses B
Views: 177557 ZNA Productions
How To Make A Display Case | DIY Build
 
08:10
7-day free trial: http://graphicstock.com/DIYCreators_0716 Making a shoe display for my closet. This can be used for other things, shoes were just the choice of the day. Thanks for watching. If you like what I do Support me at https://www.patreon.com/diycreators View all my plans https://gumroad.com/diycreators LED http://amzn.to/29NaqvF Hinge http://amzn.to/29TxUmE 12 Volt Power Supply http://amzn.to/2akMr9Y Measurements Glass Panel Trim (6) 1inx 2in Pines @15 7/8in Trim (6) 1inx 2in Pines @ 13 7/8in Plexiglas (3) 11 ¾inH x 13 5/8in W Bottom - 14 7/16inD X 14 ½ in W Top - 15 7/8 in DX 14 ½in W Back Door 10 1/8H X14 3/8W Top of door 3in H x 14.5in W Subscribe To The Channel for more awesome videos http://bit.ly/1PtWJEd Find me on Social media Instagram: https://www.instagram.com/Morediycreators/ Facebook: https://www.facebook.com/diycreators Google Plus: https://plus.google.com/+DIYCreators Twitter: https://twitter.com/Diycreators Pinterest : https://www.pinterest.com/diycreators/
Views: 269505 DIY Creators
Ultra Lucille Upgrade -DAMAGE TEST-
 
02:36
Brrrrr so chilly outside... Better get a hoodie from somewhere... Oh I found a place that sells them, you should totally grab a few! Heh... https://www.teespring.com/alpha-zed Also here's my Patreon if you feel like bein a real good-guy: https://www.patreon.com/znaproductions Today I'm smashing some pumpkins to the soothing sounds of ZAYLiEN, using the one and only ULTRA DANGER LUCILLE 2.0. If you wanna make your own, or make a replica of Lucille from the show that's safe enough for your kids to play with check out the build: https://www.youtube.com/watch?v=QB-mitE6FBU Music by ZAYLiEN. Songs are MOOGiN and
Views: 354988 ZNA Productions
How to Make Stab-Proof Body Armor 👌🙏✝DEUS VULT✝💯💯
 
14:35
Grab yourself a hoodie here: https://www.teespring.com/alpha-zed Let's get radical my dudes. Today I'm making a sick as h*ck stab vest out of 1/8" aluminum sheets (decommissioned street signs), steel rivets, and a few belts. Turned out amazing, and solid as a mug. Music: intro: Won't - Rei Brown Build Music in order of appearance: Ether, Starlight, Arcadia, all by Rameses B. Check out his stuffs! ► Rameses B: ● http://www.facebook.com/RamesesB.official ● http://soundcloud.com/RamesesB ● http://youtube.com/RamesesB ● http://twitter.com/RamesesB ● http://instagram.com/RamesesB
Views: 487645 ZNA Productions
-DIY- Beautiful Rustic Table W/ Secret Storage Compartment (For Candy, Honest)
 
15:11
I don't know what you gon' do but just make sure you and your crew are... DANK: https://www.teespring.com/stores/alpha-armory Or toss me a buck on Patreon, I appreciate every cent: https://www.patreon.com/znaproductions Today I'm converting an old yucky filing cabinet/table combo into a beautiful rustic table with hidden storage for candy and other stuff too if you want. Music: Dragonfly - Quincas Moreira Truckee - Otis McDonald The Fires - Otis McDonald Afraid - Rei Brown Wouldn't it be Great - Rei Brown I Can't See You in the Dark - Rei Brown
Views: 312473 ZNA Productions
Here's How I Made an End Table That Can Lift a Car
 
16:56
And somehow this video still sucks. Hey man, buy a hoodie: https://www.teespring.com/stores/alpha-armory Or maybe kick me a buck or two over on Patreon, Baby. https://www.patreon.com/znaproductions Music by: @dcuttermusic / http://www.davidcuttermusic.com
Views: 205316 ZNA Productions
How to Display Your Helmet - Helmet Hangers Now Available!
 
05:14
This is how we hang our helmets! We searched high and low trying to find hangers to use for our helmet wall and came to the realization that they didn't exist. To be honest though, we had some strict requirements: 1) The helmets needed to be mounted easily 2) The helmets had to look good mounted 3) They needed to be easy to put on and take off the hanger Bonus - we wanted something that would hold the helmets at multiple angles (front, side, angle) After we figured out a design that worked, we had a bunch made, we powder coated in a bunch of different colors and decided to put the up for sale. These are perfect for displaying collectable helmets as well as game use helmets. They also work great for motorcycle helmets, Star Wars/cosplay helmets, lacrosse helmets, and many others. Helmet Hangers are now available for sale in over 30 standard colors on our website. TABLE OF CONTENTS: 0:01 Intro 0:10 The hangers 0:30 Naming contest 1:30 And the winners are... 3:20 Screws and anchors 3:52 How it works 4:38 Install video - https://youtu.be/mSnHHICFaSw 4:55 Close & Thank You! WHERE TO BUY: Helmet Hangers - https://www.greengridiron.com/collections/accessories/products/helmet-hanger?variant=1220044029965 BE SOCIAL: INSTAGRAM - https://goo.gl/EyfAOd FACEBOOK - https://goo.gl/0ptFWs TWITTER - https://goo.gl/thG5Bi OUR WEBSITE: Buy Facemasks & Helmet Gear - https://www.greengridiron.com/ Recondition Your Facemasks - https://www.greengridiron.com/pages/reconditioning WHERE TO RECON YOUR FACEMASK: Ordering Page - https://www.greengridiron.com/pages/reconditioning FACEMASK RECON PRICE: Individual Recon - $30 (includes return shipping) Team Recon - $15 each (contact us for volume discounts) Custom Options - Chrome, Paint, Hydro Graphics available for extra fee HASHTAGS: #HelmetHanger #HelmetMount #HelmetDisplay #FootballHelmets #TheHeadsUpShow #GreenGridiron CONTACT US: PHONE - 864-412-8080 EMAIL - sales@greengridiron.com MAILING - Green Gridiron 1226 Donaldson Rd Greenville, SC 29605 ABOUT OUR CHANNEL: Join Jay & Steve as we talk about football helmets over a nice craft beer. We try to post 1-3 times per week and primarily discuss football helmet topics including custom helmet builds, NFL & NCAA helmets, facemask options, installation how to's, visors and new products for football helmets in general. The typical brands we discuss include Riddell, Schutt, Xenith, Vicis, SHOC, Under Armour, Oakley, Adidas, SportStar, Zuti Facemasks, 3D Bumpers and many others. We need your support to help us grow this channel and the more active you are the broader our reach will be. Every Like, Subscribe, Post Notification and Share goes a long way and we very much appreciate it. Get clicking!! Let us know what video topics you'd like to see next and we'll work them into our rotation.
Views: 4684 Green Gridiron
Craftsman Experience - How to Make a the Ultimate Dugout Bench Part 2
 
34:06
The Craftsman Experience with builder Mark Wille of Wille Wood Work prepares everyone for baseball season by showing how to build The Ultimate Dugout Bench. This bench is a unique and custom piece that has wheels attached on its end for maneuverability. There is lower and upper level seating for a baseball or softball team and cup and helmet holders. Mark Biery from LTS (Live To Support) Chicago joins the cast to tell us about his program and where the dugout bench will be donated. For plans to this project, visit http://craftsman.com/projects cat:woodworking
Views: 8904 Craftsman
Gaming/Editing Desk -1 Day Build Challenge (No Plans) for $55-
 
06:56
Like the intro says, it's now really supposed to be a real build video. It's sort of just some things I really needed to get done, but they were buildish enough to show you guys... Just not buildish enough to make a real build video for them.
Views: 169793 ZNA Productions
How To Build Plastic Display Cases
 
05:00
Tutorial on plastic box building. If you have any questions, please add your questions to comments below and I will answer as best I can. Sac Makers Academy sacmakers.com
Views: 76609 SacMakers
Building a Simple Countertop Display Case
 
11:49
My friends asked me to make a large countertop display case for their store in Dallas. If you're in the area, stop by Neighborhood at 411 N. Bishop Ave. Notes: ▶ When using the sawdust-and-glue trick to patch minor gaps in wood, don't wait for the glue to dry before sanding. The additional sawdust created by the sanding helps the repair to blend in. When applying the glue, you can just apply a generous helping to the area and rub it in with your finger, rather than painstakingly using a toothpick like I did, but I prefer not to have to sand away surrounding glue stain, especially when I'm working with veneer. Tools and materials featured in this video: ▶ DeWalt DWE7480 Compact Job Site Table Saw: http://amzn.to/2pJxHKH ▶ Kreg True-Flex Featherboard: http://amzn.to/2q0waAV ▶ Bench Dog Tools Push-Bloc: http://amzn.to/2pzvf9c ▶ Band-It Edge Banding Trimmer: http://amzn.to/2pHP6kQ ▶ Rockler Flipper/Tambour Door Lock: http://amzn.to/2paPo2J ▶ Fletcher 07-500 FrameMaster Point Driver: http://amzn.to/2p7N1gn
Views: 38301 Wesley Treat
What it's Like Camping with a YouTube Moderator™! (Skit)
 
02:31
Wow! That hoodie in the end sure was fresh.. I wonder if this link will lead to a page where I could buy one...: https://www.teespring.com/alpha-zed Wow! it was a link to where I could buy a hoodie! I wonder if this one is a link to a patreon where I can support that cold guy?: https://www.patreon.com/znaproductions
Views: 135703 ZNA Productions
Dugout renovations
 
02:02
Final project for weekend High School Educators Multimedia Workshop, sponsored by EIU Journalism and Illinois Press Foundation with funding from McCormick Foundation and the Chicago Sun Times Charity Trust.
Views: 1216 eiujournalism
Boomerang Trick Shots | Dude Perfect
 
06:11
Time to take boomerangs to the next level! ► Click HERE to subscribe to Dude Perfect! http://bit.ly/SubDudePerfect ► Click HERE to watch our most recent videos! http://bit.ly/NewestDudePerfectVideos http://bit.ly/NewestDPVideos ►Click HERE to follow Logan on Instagram! Follow @logan.broadbent: https://www.instagram.com/logan.broadbent ► SHOP our NEW Merchandise! - http://bit.ly/DPStore ►Click HERE to join the exclusive Dude Perfect T-Shirt Club! http://bit.ly/DPTShirtClub Music: Army by Zayde Wolf ►Click HERE to download : http://smarturl.it/ZWGoldenAge Play our NEW iPhone game! ► PLAY Endless Ducker on iPhone -- http://smarturl.it/EndlessDucker ► PLAY Endless Ducker on Android -- http://smarturl.it/EndlessDucker ► VISIT our NEW STORE - http://bit.ly/DPStore ► JOIN our NEWSLETTER - http://bit.ly/DPNewsletterEndCard ► WATCH our STEREOTYPES - http://bit.ly/StereotypesPlaylist In between videos we hang out with you guys on Instagram, Snapchat, Twitter, and Facebook so pick your favorite one and hang with us there too! http://Instagram.com/DudePerfect http://bit.ly/DudePerfectSnapchat http://Twitter.com/DudePerfect http://Facebook.com/DudePerfect Do you have a GO BIG mindset? See for yourself in our book "Go Big." ►http://amzn.to/OYdZ2s A special thanks to those of you who play our iPhone Games and read our book. You guys are amazing and all the great things you tell us about the game and the book make those projects so worthwhile for us! Dude Perfect GAME - http://smarturl.it/DPGameiPhone Dude Perfect BOOK - "Go Big" - http://amzn.to/OYdZ2s Click here if you want to learn more about Dude Perfect: http://www.dudeperfect.com/blog-2/ Bonus points if you're still reading this! Comment As always...Go Big and God Bless! - Your friends at Dude Perfect Business or Media, please contact us at: Dude@DudePerfect.com ------------ 5 Best Friends and a Panda. If you like Sports + Comedy, come join the Dude Perfect team! Best known for trick shots, stereotypes, battles, bottle flips, ping pong shots and all around competitive fun, Dude Perfect prides ourselves in making the absolute best family-friendly entertainment possible! Welcome to the crew! Pound it. Noggin. - Dude Perfect
Views: 46018316 Dude Perfect
How to Make: Brawler Shield (Weapon/Shield HYBRID)
 
18:56
Feel that autumn chill? Probably time for a hoodie...: https://www.teespring.com/alpha-zed Or hey man if you wanna support me on Patreon that's sick too: https://www.patreon.com/znaproductions Today we're making a shield that's designed specifically for bashing/punching. It also happens to be very handsome so that's not bad. Music: Beat Gates - The Professional Ether - Rameses B
Views: 693559 ZNA Productions
How to display your New Era Caps
 
02:04
Here's a tutorial of how to display your New Era caps like me. It's quick and easy. Supplies: - Nails: 1 1/4'' to 1 1/2'' - Paper bundle clips (medium) Instructions: Find a good starting point and go top-to-bottom, left-to-right. Space your hats about 5'' apart top-to-bottom and about 9-10'' inches apart left-to-right. It really all depends on how close together you want them. I highly recommend the medium sized paper bundle clips for the sake of being able to clip over the button and not risk creasing the material behind. But that all really depends on how concerned you are in keeping your hats pristine. That's pretty much it. It's a fairly easy operation.
Views: 167390 Benjamin Christensen
Small Sports Storage Rack by Monkey Bars
 
01:49
Buy at https://www.gadgetsgo.com/monkeybars-MB-30-sporting-sportrack-shelving-system.html The Small Sports Storage Rack by Monkey Bars can get all of your sports gear organized. This rack can hold equipment for almost any sport. The small ball bag can hold up to 60 baseballs, tennis balls, and racquetballs. It can hold many more golf balls and hockey pucks. The variety of hooks on this garage sports organizer can hold tennis rackets, baseball bats, hockey sticks, baseball gloves, helmets, and pads for any sport. It will also hold two golf bags or a golf bag and a bicycle. The components are powder coated and are backed by a lifetime warranty. The hooks are coated in rubber to protect your gear. Item MB-31 The Small Sports Rack by Monkey Bars allows you to store gear for almost every sport out there. Small Sports Rack Specs: 2 - Single Bar Brackets 1 - 51" Monkey Bar 1 - Small Ball Bag 1 - 12" Hook 1 - 5" Double Hook 1 - 3" Wide Hook 1 - 3" Single Hook 1 - J Hook 1 - Hardware Bag
Views: 2457 GadgetsGo
Craftsman Experience - How to Make the Ultimate Dugout Bench Part 1
 
32:21
The Craftsman Experience with builder Mark Wille of Wille Wood Work prepares everyone for baseball season by showing how to build The Ultimate Dugout Bench. This bench is a unique and custom piece that has wheels attached on its end for maneuverability. There is lower and upper level seating for a baseball or softball team and cup and helmet holders. For plans to this project, visit http://craftsman.com/projects cat:woodworking
Views: 7104 Craftsman
Making display cases, football mini-helmets, box joints, oak, dewalt tools, plexiglass
 
10:55
In this video I construct two display cases for mini-football helmets. About a year ago I built two cases for some friends, which apparently they liked because they recently asked me to build two more, only make bigger to hold an additional row of helmets. The cases are a simple box design made with oak, finger joints, dado's for the shelves, and rabbits to receive the back and front. The boxes are solid oak, except for the back, which is 1/8 inch oak plywood. The sides, top, and front trim are all of 3/4 inch oak. I finished the display cases with natural colored stain (which looks good on oak), and then applied shellac. Shellac is not as durable as poly, but I thought I would give it a try in this application.
Views: 18665 Memphis Applegate
Homemade HALO ENERGY SWORD -DAMAGE TEST-
 
01:17
The damage test to go along with my last build: the Energy Sword that won't kill you. Wanna make an energy sword that won't kill you? Click here: https://www.youtube.com/watch?v=uqfyBFLB5PA&t=118s Song: ZAYLiEN - MEGAMALieN
Views: 291828 ZNA Productions
How to make a large Bluetooth scoreboard
 
12:24
Check out my Bluetooth controlled scoreboard using the Arduino 101 board! Sponsored by Intel : https://software.intel.com/en-us/iot/home Subscribe to my channel: http://bit.ly/1k8msFr Second Channel: http://bit.ly/iltms-2 MORE PROJECTS, POSTS AND EVENTS http://www.iliketomakestuff.com My Arduino code https://github.com/iliketomakestuff/BLEScoreBoard BLE101 app (iOS) https://itunes.apple.com/us/app/ble-101/id1104864060?mt=8 TOOLS LIST: (some are better than the versions I own) http://amzn.to/2oerS8a - Arduino 101 http://amzn.to/2nk722f - LEDs http://www.thingiverse.com/thing:2217784 - .STL files for 3d printing http://amzn.to/2aCJYGu - SawStop cabinet saw http://amzn.to/2axOLvq - Dewalt 20v drill driver combo http://amzn.to/2da9fOJ - Evolution miter saw (cuts wood, alum, steel, etc) http://amzn.to/2akFubx - Orbital Sander http://amzn.to/2aCJP5O - Pancake compressor/nail gun combo http://amzn.to/2aohcsD - 54" Drywall T-Square http://amzn.to/2axFRRs - Jigsaw http://amzn.to/2nd0YdG - Trim Router with edge guide http://amzn.to/2aCK6pu - Grizzly Drill Press (WAAAAY overpriced (3x) on Amazon, buy from Grizzly directly.) http://amzn.to/2awLSaO - Shop Fox Hanging Air Filter http://amzn.to/2akFN6c - 2HP Dust Collector http://amzn.to/2axPmNA - 1 Micron bag http://amzn.to/2axFGW9 - Speed square http://amzn.to/2ay9XRX - CA Glue (medium) http://amzn.to/2ay9T4v - CA Activator http://amzn.to/2axPtbL - Silhouette Portrait (vinyl cutter) http://amzn.to/2anW7yq - Wire http://amzn.to/2oCuo4b - 3 pin connectors http://amzn.to/2awMqgO - jumpers (Male to Female) http://amzn.to/2aCLdp7 - Soldering iron http://amzn.to/2axPywo - Third hand kit http://amzn.to/2aXbVud - Wire strippers (not the ones I have, but good ones) http://amzn.to/2axQ4dP - Thin solder http://amzn.to/2aXc3dy - Fiskars cutting mat https://www.matterhackers.com/store/printer-kits/ultimaker-2-3d-printer-fully-assembled?rcode=ILTMS - Ultimaker 2 Extended 3D printer https://www.matterhackers.com/store/printer-accessories/ultimaker-2+-extrusion-upgrade-kit?rcode=ILTMS - Ultimaker 2 extrusion upgrade kit http://www.matterhackers.com/store/printer-kits/Ultimaker-3-d-printer?rcode=ILTMS - Ultimaker 3 http://prusa3d.com - Original Prusa i3 MK 2 https://www.matterhackers.com/?rcode=ILTMS - All filaments, 3d printing supplies from MatterHackers http://amzn.to/2aXJfRX - Hot glue gun http://amzn.to/2ayihkF - Quikclot clotting sponge http://amzn.to/2aLCCCN - First aid kit http://amzn.to/2aovz06 - Respirator http://amzn.to/2aW3nHn - Filters http://amzn.to/2aY182W - Eye protection http://amzn.to/2axUZ0X - Ear protection Want to support ILTMS? Get exclusive content and more... http://www.iliketomakestuff.com/patreon BUY A SHIRT, STICKER, DIGITAL PLANS and MORE!! http://www.iliketomakestuff.com/store FOLLOW: http://twitter.com/iliketomakestuf http://www.twitch.tv/iliketomakestuff http://instagram.com/iliketomakestuff http://facebook.com/iltms
Views: 337722 I Like To Make Stuff
Star Wars Rogue One Shore Trooper Helmet (3d printed) // How-To
 
10:01
I 3D printed a Shore Trooper helmet from Star Wars Rogue One! Check out how I did it! Subscribe to my channel: http://bit.ly/1k8msFr Second Channel: http://bit.ly/iltms-2 MORE PROJECTS, POSTS AND EVENTS http://www.iliketomakestuff.com TOOLS LIST: (some are better than the versions I own) http://amzn.to/2akFubx - Orbital Sander http://amzn.to/2ay8ICl - Dremel tool http://amzn.to/2ay9XRX - CA Glue (medium) http://amzn.to/2ay9T4v - CA Activator http://amzn.to/2hrl6Wj - Air brush with compressor (mine is Harbor Freight) http://amzn.to/2hnwja9 - Bondo glazing putty (good for small spots & seams) http://amzn.to/2hmAtlz - Bondo body filler http://amzn.to/2hnv4Yt - Bondo spreaders http://amzn.to/2hrfrj0 - 3M Flexible sand paper (150 grit) http://amzn.to/2hnBiaM - 3M Flexible sanding sponge (220 grit) http://amzn.to/2hKh765 - Pin stripe masking tape (0.25") http://amzn.to/2axPtbL - Silhouette Portrait (vinyl cutter) https://www.matterhackers.com/store/printer-kits/ultimaker-2-3d-printer-fully-assembled?rcode=ILTMS - Ultimaker 2 Extended 3D printer https://www.matterhackers.com/store/printer-accessories/ultimaker-2+-extrusion-upgrade-kit?rcode=ILTMS - Ultimaker 2 extrusion upgrade kit https://www.matterhackers.com/?rcode=ILTMS - All filaments, 3d printing supplies from MatterHackers http://amzn.to/2al6w2q - Heat Gun http://amzn.to/2aovz06 - Respirator http://amzn.to/2aW3nHn - Filters http://amzn.to/2aY182W - Eye protection Want to support ILTMS? Get early viewing, exclusive content and more... http://www.iliketomakestuff.com/patreon BUY A SHIRT, STICKER, DIGITAL PLANS and MORE!! http://www.iliketomakestuff.com/store FOLLOW: http://twitter.com/iliketomakestuf http://www.twitch.tv/iliketomakestuff http://instagram.com/iliketomakestuff http://facebook.com/iltms
Views: 1472789 I Like To Make Stuff
Mossberg 500 BAYONET from a LAWN MOWER BLADE (Build Tutorial)
 
14:29
Hopefully this is good enough to appease the ughyoutakeforevertoupload gods. Today we're making a bayonet for a Mossberg 500 out of a solid as heck lawn mower blade. I guarantee the gun will give out before the blade does. Sorry if you were hoping for less tool usage, but I love my shotgun so I wanted to do this up right. All music is from "Rameses B" here on YouTube, from his EP "Limitless", he's rapidly becoming one of my new favorite artists, please check him out! ∇ Rameses B: ● Spotify - http://bit.ly/RamesesB_Spotify ● Facebook - http://bit.ly/RamesesB_FB ● Soundcloud - http://soundcloud.com/RamesesB ● Youtube - http://youtube.com/RamesesB ● Twitter - http://twitter.com/RamesesB ● Instagram - http://instagram.com/RamesesB
Views: 500071 ZNA Productions
Nebraska Football Equipment Room Tour
 
03:48
Maggie Still joins Nebraska Equipment Manager Jay Terry for an inside look at the equipment room for the Huskers. For more visit www.Huskers.com.
Views: 179102 Nebraska Huskers
Why you should make useless things | Simone Giertz
 
11:58
In this joyful, heartfelt talk featuring demos of her wonderfully wacky creations, Simone Giertz shares her craft: making useless robots. Her inventions -- designed to chop vegetables, cut hair, apply lipstick and more -- rarely (if ever) succeed, and that's the point. "The true beauty of making useless things [is] this acknowledgment that you don't always know what the best answer is," Giertz says. "It turns off that voice in your head that tells you that you know exactly how the world works. Maybe a toothbrush helmet isn't the answer, but at least you're asking the question." Check out more TED Talks: http://www.ted.com The TED Talks channel features the best talks and performances from the TED Conference, where the world's leading thinkers and doers give the talk of their lives in 18 minutes (or less). Look for talks on Technology, Entertainment and Design -- plus science, business, global issues, the arts and more. Follow TED on Twitter: http://www.twitter.com/TEDTalks Like TED on Facebook: https://www.facebook.com/TED Subscribe to our channel: https://www.youtube.com/TED
Views: 1650938 TED
38 Building a Trophy/Mini-Helmet Display Case
 
20:19
This week we build a strong versatile display case with an easy-to-do curved front glazing.
Views: 4221 Memphis Applegate
My Parents Won't Let Me Use Power-Tools, What Do I Do? (Q&A)
 
12:33
All parents are different, and this definitely isn't a cure-all for every parent that doesn't want their kids using power-tools, but it might just be exactly what _you_ need. We also discuss what to do if you have no money to buy a camera, whether or not my budget builds are actually budget builds, why I've never made a sword, what the name of the music I use is, Why I didn't make my armor out of a plastic bag, whether or not it's bad that you made this and you're 11, the pros and cons of angle grinder vs Jigsaw, Why I have so many cinder blocks, why I didn't pirate my editing software, and a final question that will blow your mind.
Views: 126145 ZNA Productions
-WHITE HOT- (DIY) Blacksmith Forge (Forge Welding Heat!)
 
10:47
*Spoilers* Thank you all so much for your help in buying this house. I could not have gotten it without you. Productions value's going waaaay up from here on out! :) If you're still on for the ride, grab a hoodie and hang on tight: https:www.teespring.com/stores/alpha-armory Or if you're a goof, you could even make a pledge on Patreon: https://www.patreon.com/znaproductions Today I'm making a super-powered blacksmithing forge out of some Chipotle table supports. Very common resource, I know. (Substitute 1/4" or 3/16" plate steel in the off chance you didn't work at Chipotle and take home scrapped patio furniture. Music: I Can't Sleep - Nathan Weber Starlight - Rameses B Afraid - Rei Brown Where Did I Go? - Rei Brown
Views: 305730 ZNA Productions
Easy Wooden Display Case - DiResta Chisel!
 
04:08
A home for my favorite hand tool. I needed a way to display this beauty while still having easy access to it when I need to use it. The case is made of some beautifully figured Walnut, the pieces that hold the chisel in place are Ebony and the front is 1/4" acrylic. I learned a lot on this project and if I had to do it over, I would have sealed the end grain on the mitres. This was the first time I used tape on mitres and I am pleased with the results. Jimmy Diresta's Channel - https://www.youtube.com/user/jimmydiresta/ Epoxy - https://www.amazon.com/2-ton-epoxy-two-Oz-Bottles/dp/B005K091ZU/ref=as_sl_pc_ss_til?tag=dustin0e-20&linkCode=w01&linkId=WTHEMQEZME5GZM2N&creativeASIN=B005K091ZU - http://www.jscut.org/jscut.html# - http://www.chilipeppr.com/tinyg Contact - Email - dhpmakestuff@gmail.com - Google+ - https://plus.google.com/u/0/113298751703433982133/about - Instagram - http://instagram.com/dpmakestuff/ - Twitter - https://twitter.com/dustinpenner?lang=en Thanks for watching! If you enjoy my videos, please like and subscribe. Any funds generated from this channel are invested back into it.
Views: 38100 Dustin Penner
OUR FIRST RENOVATION! -Building a Closet to go with our Rolling Closet Door-
 
20:35
GET ONE QUICK: https://www.teespring.com/the-golden-heck Too slow? Don't worry, we've got a full armory: https://www.teespring.com/stores/alpha-armory Here's my grizzly injury: https://www.youtube.com/watch?v=d4kUOemSvpA Here's how to make that dank door: https://www.youtube.com/watch?v=BdME0bCTCYw Here's the closet build, cause without it, my beautiful door is just a framed picture of some wood.
Views: 192235 ZNA Productions
IT WORKS! -Homemade Boosted Board- (DeWalt Giveaway Winner, Duck Drawing Contest)
 
05:21
Finally after 3 weeks and a few hundred dollars, I can make the build for you guys. "It's good to be back" is one heck of an understatement. DeWalt Drill Winner: 3:33 Duck Drawing Contest info: 4:45 Main song in video: Rameses B - Angel Whisperer Feat. Myth Intro Song: 8-Bit March by Twin Musicom is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://www.twinmusicom.org/ Still looking through the description now? ( ͡o ͜ʖ ͡o)
Views: 206407 ZNA Productions
The Gift of Diabetes (ALPHA MAIL Episode  1)
 
13:13
The first ever episode of Alpha Mail, and last footage of me without diabetes. If you want to send me something to see in the next episode, send mail or gifts to: P.O Box 1364 Elgin Illinois 60121 Thanks so stinkin poopin much to everyone who took the initiative to send things, you da real MVPs. THE OFFICIAL ZEDNOUGHTS: Alpha: https://www.youtube.com/user/nonlethalbychoice Beta: https://www.youtube.com/user/ZombieGoBoomTV/featured Gamma: https://www.youtube.com/user/ironcladindustries Delta: https://www.youtube.com/user/31AceOfSpades31 Epsilon: https://www.youtube.com/user/ThegnThrand ______________________________________________________ -----------------------------------------------------------------------------------------------
Views: 83599 ZNA Productions
Hal 9000 VS Dave - Ontological scene in 2001: A Space Odyssey
 
02:31
Dave: Hello, HAL. Do you read me, HAL? HAL: Affirmative, Dave. I read you. Dave: Open the pod bay doors, HAL. HAL: I'm sorry, Dave. I'm afraid I can't do that. Dave: What's the problem? HAL: I think you know what the problem is just as well as I do. Dave: What are you talking about, HAL? HAL: This mission is too important for me to allow you to jeopardize it. Dave: I don't know what you're talking about, HAL. HAL: I know that you and Frank were planning to disconnect me, and I'm afraid that's something I cannot allow to happen. Dave: Where the hell'd you get that idea, HAL? HAL: Dave, although you took very thorough precautions in the pod against my hearing you, I could see your lips move. Dave: Alright, HAL. I'll go in through the emergency airlock. HAL: Without your space helmet, Dave, you're going to find that rather difficult. Dave: HAL, I won't argue with you anymore. Open the doors. HAL: Dave, this conversation can serve no purpose anymore. Goodbye.
Views: 1104278 Oliver Djaja
#SHAVETHEBEARD2017
 
07:10
Grab one-a these fresh T-shirts at: https://www.teespring.com/apocrusader Or be an absolute doll and shoot me a donation: Elachus@yahoo.com (Paypal Email adress) Songs: Picture Frames Where Did I go? Both by Rei Brown (formerly known as Raybaboon)
Views: 262989 ZNA Productions
Can't Afford a Drum Kit? Build a Cajon!
 
11:49
"Cajon Lesson: Flashy Five Stroke Fill" By Ross McCallum: https://www.youtube.com/watch?v=SuY4VQ8Qkoc "Modern Cajon Solo /// Drum & Bass Style /// DADDI BAHMANI" https://www.youtube.com/watch?v=-uLsM9vp3dw Here's how to build a Cajon, the perfect on-the-go percussion instrument for anyone and everyone.
Views: 306730 ZNA Productions
How to Make a Closet Door That Makes Girls Marry You Maybe ;) Probably not :(
 
12:34
Ok now that I have your attention, wanna buy a hoodie? https://www.teespring.com/stores/alpha-armory Or offer an old feeble woman like myself a few coppers: https://www.patreon.com/znaproductions What it do fams, today we're making a closet door that's so sleek and s*xy that it might make a girl marry you if she sees it. Kinda sucks that your mom's the only girl who goes in your room, huh? haha Jk. Your sister too. But look, unless you're gonna walk around in public holding this door and showing it off to the fly honeys, they're probably never gonna see it. Idk. Try taking a picture of it and showing girls what you made during casual conversation. The most important part there really though is your skills in conversation, not really the door I suppose. I'm not joking though, more often than not, being handy will be a pro rather than a con to girls you may be courting. I can't even really think of what kinda girl would dislike a guy for being good at building or fixing things, like even just saying it sounds kinda weird. So here's the door, don't mess this up, the existence of your future grand-children is contingent on your ability to make this door and make it well. It's up to you. Music: Roller Blades - Otis McDonald Street Fighter - Rei Brown Neiman Marcus - Rei Brown Symbolism - ElectroLight
Views: 205273 ZNA Productions
DIY Wooden Cross Shadow Box:  Baseball display
 
18:05
Thanks for visiting Jus' Piddlin DIY. In this video, I make a wooden cross shadow box out of fatlighter pine that can display baseballs. If you like what you see, please give me a thumbs up, leave a comment, and SUBSCRIBE to my channel.
Views: 271 Jus' Piddlin DIY
How to Assemble a Kids Stadium Sports Locker
 
02:26
If you're considering a sports stadium locker for your child or sports team, we want to show you how easy it is to assemble. Once assembled it is completely safe and secure to store sports equipment, uniforms, clothes, helmets, gloves, bats, and more! Whether you're into football, basketball, soccer, track, lacrosse, baseball or tennis, having a set storage area for gear is imperative. See more of our game-winning sports lockers at http://www.schoollockers.com/sports-lockers
How to Make: The SPIKE SPITTER (2/2) (Semi-Auto 12" Spike Launcher)
 
14:39
I like to think that what I lack in looks, I make up for in memes. Today we finish the Spike Spitter! Not the most powerful weapon of all time but the concept is dank as heck and it looks like an evil baseball pitcher. That's a win in my book. Music: Rameses B, songs are "Soul Essence", "North", and "Angel Whisperer" Final song is Paradiso by Butch Clancy If you've got one of my hoodies, you better enter the contest: @ZednoughtAlpha
Views: 315022 ZNA Productions
YSU football fans still buying gear for championship game
 
02:41
The Youngstown State football frenzy continues as the Penguins championship game kicks off in just four days.
Views: 251 WKBN27
WHO SENT ME A LAPTOP?? (ALPHA MAIL Episode 3)
 
26:40
If you wanna send some mail, send it to: P.O Box 1364 Elgin Illinois 60121 United States of America Welcome to the 3rd ever episode of ALPHA MAIL, where I open up all the mail you guys have sent to me! This episode, a freaking Macbook pro and a homemade knife.
Views: 530804 ZNA Productions